CZ PCR
$0.00
CZ Slide milling, here is a list of direct mounting versus plate mounting
Direct
Holosun 407/507K/EPS/EPS carry
Trjicon RMRCC
Luepold DPP
Steiner MPS
Aimpoint Acro
Holosun 509T
Vortex Viper/Venom/Defender
Plate mounting
Trijicon RMR/SRO
Holosun 407/507 C
It is recommended to have your slide coated to prevent corrosion.
If you include iron sights and/or a red dot we will install them for you.
Screws are included with each optic cut.
If you need irons sights you can order them here. We will install them on your slide.
*Please note that when you select RMR/SRO or Holosun 507/508 you total will increase due to the fact that CZ slides are .926-.930 wide which would put the mounting screws for the optic in the serrations. There is not enough material to use 6/32 standard mouting screws so the total includes a mounting plate with or without back sights and a taller front sight*
Please fill out our Contact Form if you have further questions.
We suggest that you add coating to your slide, however we do not make you. Stainless slides do not need coating as much as carbon steel slides do. Both can rust (yes stainless can rust) it all depends on the grade of metal and the conditions in which the slide is in.
We no longer offer a cold bluing solution. If you choose to not have a coating on your milled slide, it will be returned back to you milled and oiled. By purchasing this product you agree to these terms and conditions. We are not responsible if your slide rusts or corrodes when selecting no coating
Reviews
-
Slide milling and cerekote
Work was excellent and on time. Optic was nice and low and fit perfect. The OD cerekote was perfect. Price was right and work was completed in the time I was quoted. 0 hassle, great price, on time and fine craftsmanship everything I wanted. Will be back
-
P01 optic cut and cerakote
Dang good result, the bottom of the optic lens is about level with the top of the slide. Talk about flush! Not fitment issue. Cerakote didn't have any noticeable issues and seems to be applied evenly across the slide (unlike another slide I have done by someone else) and best of all wasn't a long down time from sending the slide out and getting it back.