ICM P01 Quick Ship RMR Slide

To help make these ship much quicker than our other slides these will come milled for Direct Mount RMR/Holosun 507/508 (first to market) and come with DLC coating. These are expected to ship within 10 days of order. 

If you would like to add additional options please see our other slide options. 

After years of development and testing, Impact CNC Machine is honored to offer the first-ever replacement CZ P01 (compact-size) slides. These are designed to be different in several areas:

• Use your internals (barrel, recoil spring, guide rod, firing pin, firing pin spring, retaining pin) or select from 2 options to be added to your order
• No barrel bushing design (yes we confirmed it's as accurate or better than a stock slide) (bench rest, off-hand, one hand, and running drills)
• ICM Serrations front and back
• Direct Mount 509T (first to market)
• 416 Stainless steel
• Heat-treated and thoroughly tested
• It will come with a shorter extractor pin
• Optic screws (6/32 thread pitch) will also be included with each order.

*Internals include: Please specify OEM (original CZ firing pin or CGW internals) this is your responsibility! ONLY SELECT CGW INTERNALS IF YOU CURRENTLY HAVE LIGHTER SPRINGS AND/OR PERFORMANCE PARTS!

• Extractor
• Extractor Spring
• Extractor Pin
• Retaining Pin (firing pin)
• Firing Pin and Spring 
• Plunger 
• Plunger Spring 

 * IF YOUR SLIDE IS AN OMEGA AND YOU DO NOT SELECT OMEGA IT IS YOUR RESPONSIBILITY TO RETURN IT FOR MODIFICATIONS. THERE IS A CLEAR OMEGA SYMBOL ON YOUR SLIDE SO PLEASE CHECK THAT BEFORE HITTING SUBMIT.

* OUR SLIDES ARE "AFTERMARKET" MEANING WE MAKE THEM, SO WE MADE THE RECOIL CHANNEL LONGER AND IN SOME CASES WITH A STAINLESS STEEL GUIDE ROD AND FACTORY SPRING, IT WILL NOT FIT. YOU NEED A ROUND WIRE SPRING.

Dealer's Choice Top Slide Cut is not limited to the current offering. You could receive a new and unreleased port!

DISCLAIMER: We have thoroughly tested and fired with Magtech, Monarch, Federal, and Blazer steel/brass case ammunition with very little to no issues. Our slides for some reason do not like aluminum case ammunition. With this being said not all rounds/casings are exactly the same in measurements, some can get caught up in the barrels and not eject right. Our slides have a break in period at about 100-300 rounds. After this period there should be no "ejection" or "feed" issues. If you still experience small issues please reach out to us, as we will work to resolve it.